I used this on my LOS acro build while using 4.5mm rubber anti-vibe fixed screws to mount the DYS F30A I got away with using 20mm standoffs and it gave me a little over 2 mm clearance from the top plate. it made my build very easy and very clean looking and it has held up very well through many hard crashes and some rain.My only problem is the connector that connects the DYS F30A and DYS F4 Pro has started to come loose I can see that the epoxy it releasing around the connector. I would like to see an improvement in the connector since it susceptible to pulling away from the board.

I used this on my LOS acro build while using 4.5mm rubber anti-vibe fixed screws to mount the DYS F30A I got away with using 20mm standoffs and it gave me a little over 2 mm clearance from the top plate. it made my build very easy and very clean looking and it has held up very well through many hard crashes and some rain.My only problem is the connector that connects the DYS F30A and DYS F4 Pro has started to come loose I can see that the epoxy it releasing around the connector. I would like to see an improvement in the connector since it susceptible to pulling away from the board.

I used this on my LOS acro build while using 4.5mm rubber anti-vibe fixed screws to mount the DYS F30A I got away with using 20mm standoffs and it gave me a little over 2 mm clearance from the top plate. it made my build very easy and very clean looking and it has held up very well through many hard crashes and some rain.My only problem is the connector that connects the DYS F30A and DYS F4 Pro has started to come loose I can see that the epoxy it releasing around the connector. I would like to see an improvement in the connector since it susceptible to pulling away from the board.

Hello dear banggood team I got the dys tower from you and I connected it with a lipo to mesher the output. The components get really hot an I only have 1.34 v in the outputs!? I think the IC have a problem! Place give me a feedback to this problem. Thanks

Hello dear banggood team I got the dys tower from you and I connected it with a lipo to mesher the output. The components get really hot an I only have 1.34 v in the outputs!? I think the IC have a problem! Place give me a feedback to this problem. Thanks

Hello dear banggood team I got the dys tower from you and I connected it with a lipo to mesher the output. The components get really hot an I only have 1.34 v in the outputs!? I think the IC have a problem! Place give me a feedback to this problem. Thanks

Mejor controladora, y esc 4en1 que he probado. La calidad, y la fabricación insuperables, buena presentación.

Mejor controladora, y esc 4en1 que he probado. La calidad, y la fabricación insuperables, buena presentación.

Mejor controladora, y esc 4en1 que he probado. La calidad, y la fabricación insuperables, buena presentación.

Good

Good

Good

impeccable sur mon iflight ix5 et en BF 3.2. je recommande.

impeccable sur mon iflight ix5 et en BF 3.2. je recommande.

impeccable sur mon iflight ix5 et en BF 3.2. je recommande.

Удобный монтаж, качественные штуки.

Удобный монтаж, качественные штуки.

Удобный монтаж, качественные штуки.

Can't wait to get this up and running. Should make for a tidy build.

Can't wait to get this up and running. Should make for a tidy build.

Can't wait to get this up and running. Should make for a tidy build.

sembra essere ben funzionante solo collegato al pc ma non ancora montato su di un quadricottero ,vedremo come va anche se le premesse sono buone

sembra essere ben funzionante solo collegato al pc ma non ancora montato su di un quadricottero ,vedremo come va anche se le premesse sono buone

sembra essere ben funzionante solo collegato al pc ma non ancora montato su di un quadricottero ,vedremo come va anche se le premesse sono buone

gran controladora + aio 30a

gran controladora + aio 30a

gran controladora + aio 30a

Excelente calidad, me han funcionado perfecto para la configuración que uso.

Excelente calidad, me han funcionado perfecto para la configuración que uso.

Excelente calidad, me han funcionado perfecto para la configuración que uso.