good kit,need little brain ro put it together

good kit,need little brain ro put it together

good kit,need little brain ro put it together

Caution! This kit is for an Ender 3 Pro only, i.e. make sure your Y axis is on a 40x40mm profile. It can be adapted to the other Ender 3 models with the 20x40mm Y axis, but it requires drilling new holes to the Y carriage and 3D printing the Y axis ends. The product itself is very well built, it takes some time to get it assembled properly. I had the Z axis binding after assembly. After loosening the Z extrusions at the top and bottom, then tightening them back up again, everything was fine.

Caution! This kit is for an Ender 3 Pro only, i.e. make sure your Y axis is on a 40x40mm profile. It can be adapted to the other Ender 3 models with the 20x40mm Y axis, but it requires drilling new holes to the Y carriage and 3D printing the Y axis ends. The product itself is very well built, it takes some time to get it assembled properly. I had the Z axis binding after assembly. After loosening the Z extrusions at the top and bottom, then tightening them back up again, everything was fine.

Caution! This kit is for an Ender 3 Pro only, i.e. make sure your Y axis is on a 40x40mm profile. It can be adapted to the other Ender 3 models with the 20x40mm Y axis, but it requires drilling new holes to the Y carriage and 3D printing the Y axis ends. The product itself is very well built, it takes some time to get it assembled properly. I had the Z axis binding after assembly. After loosening the Z extrusions at the top and bottom, then tightening them back up again, everything was fine.

Sinceraly I don´t like, because where is the manual to help in the assemblyjQuery111306169553782189643_1609800210291?

Sinceraly I don´t like, because where is the manual to help in the assemblyjQuery111306169553782189643_1609800210291?

Sinceraly I don´t like, because where is the manual to help in the assemblyjQuery111306169553782189643_1609800210291?

poorly packed and guide rails missing the small cap to stop the carage from falling of the rails.

poorly packed and guide rails missing the small cap to stop the carage from falling of the rails.

poorly packed and guide rails missing the small cap to stop the carage from falling of the rails.

This kit comes complete with almost everything you need to make it work on an ender 3 V2. There are two issues with the kit as supplied. 1) for the V2 the hot end shroud doesn't work with the included bracket. The included bracket is for the Ender 3 regular printer not the V2. I had to fabricate a bracket from my old bracket and the belt slots don't line up right. 2) the m3x8 screws for the bearing blocks are too long and they should be m3x6 for x and 1 z axis, but are okay for y and motor side z axis. There are NO way instructions so figuring it all out is hard. There are a few YouTube videos that help if you get lost. Overall I'm happy with the kit and it's an upgrade, but not complete as shipped. The BLtouch is a nice bonus for the price!!!!

This kit comes complete with almost everything you need to make it work on an ender 3 V2. There are two issues with the kit as supplied. 1) for the V2 the hot end shroud doesn't work with the included bracket. The included bracket is for the Ender 3 regular printer not the V2. I had to fabricate a bracket from my old bracket and the belt slots don't line up right. 2) the m3x8 screws for the bearing blocks are too long and they should be m3x6 for x and 1 z axis, but are okay for y and motor side z axis. There are NO way instructions so figuring it all out is hard. There are a few YouTube videos that help if you get lost. Overall I'm happy with the kit and it's an upgrade, but not complete as shipped. The BLtouch is a nice bonus for the price!!!!

This kit comes complete with almost everything you need to make it work on an ender 3 V2. There are two issues with the kit as supplied. 1) for the V2 the hot end shroud doesn't work with the included bracket. The included bracket is for the Ender 3 regular printer not the V2. I had to fabricate a bracket from my old bracket and the belt slots don't line up right. 2) the m3x8 screws for the bearing blocks are too long and they should be m3x6 for x and 1 z axis, but are okay for y and motor side z axis. There are NO way instructions so figuring it all out is hard. There are a few YouTube videos that help if you get lost. Overall I'm happy with the kit and it's an upgrade, but not complete as shipped. The BLtouch is a nice bonus for the price!!!!

Seems great!

Seems great!

Seems great!

good product, but I’m would like som instructions to make it easier to install😊

good product, but I’m would like som instructions to make it easier to install😊

good product, but I’m would like som instructions to make it easier to install😊

works great! off the rails yo!

works great! off the rails yo!

works great! off the rails yo!

Ok!

Ok!

Ok!

Fast delivery, all good.

Rychlé dodání, vše v pořádku.

Fast delivery, all good.