Customer Reviews

4.96 out of 5
See all 138 reviews
Write a Review
  • All Reviews (138)
  • Image (28)
  • Video (0)
  • All Star
    • All Star(138)
    • 5 Star(135)
    • 4 Star(2)
    • 3 Star(0)
    • 2 Star(0)
    • 1 Star(1)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United States)
Show Original

A part of the review has been auto-translated.

  • 23/08/2021

    First test was positive. I printed a 5cm high Vulpix Pokemon which I modeled and used the Lychee slicer to slice and had to use a own USB pen drive as it didn't come pen drive inside the packaging. But I believe it's possible to place the brackets on some slicer and then open the stl on the halot One's own slicer. This should allow you to send straight from the pc to the printer through her WIFI. First test was positive. I printed a pokemon Vulpix with 1.5 cm height that I modeled and used the Lychee to slice and I had to use the USB flash drive myself because there was no flash drive inside the package. But I believe that it is possible to put the supports in any book and then open the stl in halot One's owner book. This should allow sending it directly from the pc to the printer through its WIFI.

    Show Original
  • 10/07/2021

    Shipping was very fast and the printer arrived in great condition. The product was taxed, but at the time of purchase I opted for Banggood's fare insurance and it's going all right to receive the refund. The Banggood customer support team is very good, responds quickly and resolves. As for the product itself, it's a great printer, but it's still in the software development phase. Even so it is the best cost benefit in the market for a 3D printer with mono LCD with 2k resolution. Would recommend!

    Show Original
  • 26/10/2021

    Had given up trying to bend a LD-002H to my will..fitted a proper LED driver, masked the LCD with copper tape etc. Still had UV bleed through forming skin and artifacts in the vat which affected the print. next step was a new LCD, still with no guarantee of success. I ordered the Halot as I still have faith generally in Creality, I have 5 of their printers. Out of the box, performed flawlessly ! EXCELLENT quality prints. 1. First, update the firmware to the latest version. Much better than the version supplied. If you can't see the wireless upgrade option, the firmware is just to early. Download from Creality and use the stick. 2. DO NOT look for LED time, base layers etc. in the software. This is all done on the Halot itself. You don't have to bake these settings into the model files now. At first I thought WTF... then very quickly realised sooo much better. 3. There is no calibration card, no matter how many times you pull the packing apart :D . use a piece of A4 paper, after removing the protective plastic, unlike the video... Still a messy way to make models, but the results are awesome !

    Show Original
  • 14/01/2022

    Very good packaging!! Upgrade via Wifi ok all ok came with pen ;) thank you so much banggood put there the photos for my friends PORTUGUESE ;) This order went very well ;)

    Comments (1)
    Show Original
  • 11/01/2022

    Excellent shipping tracking. Really good product straight out of the box. Clear instructions and easy and quick setup. No memory stick included as per the standard config but this wasn’t unexpected

    Show Original
  • 03/01/2022

    came little damaged but it look like the printer is ok but not working wifi connection. i try it maybe 20 time and nothing also try to create a new wifi on old router but still have wifi connection problem.

    Show Original
  • 30/12/2021

    Very fast delivery (3 days from CZ warehouse)! It arrived undamaged thanks to the right thick sponge packaging! First impressions are good, testing will be even later if the resin arrives too! The firmware must be updated to the latest before first use! Christmas sale very worth it !!!! :)

    Show Original
  • 29/12/2021

    1 week delivery, all in working order. the prints came out ok, with good definition using water based resin. recommended for a first resin printer. easy to use and with build in Wi-Fi

    Show Original
  • 19/01/2022

    Fantastic! second test and without even having inserted the supports has printed a statuette so nothing short of egregio ..really recommended!

    Show Original
  • 18/01/2022

    Fast shipping, printed a couple of miniatures, all good so far. I'm very pleased with the product and supplier!

    Show Original

    Total 0 pages

    Go to page


    You might be interested in

    recommendation for you
    • US$2.09
    • US$1.50
    • US$206.00
    • US$1.99
    • US$9.99
    • US$2.39
    • US$1.99
    • US$199.00
    • US$42.99
    • US$239.99