Customer Reviews

4.94 out of 5
Write a Review
  • All Reviews (632)
  • Image (110)
  • Video (0)
  • All Star
    • All Star(632)
    • 5 Star(594)
    • 4 Star(35)
    • 3 Star(3)
    • 2 Star(0)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United States)
  • 07/11/2020

    If you have experience with building a computer then putting this together is easy enough, the Ikea style assembly guide is good but it skips some minor details that I had to go to YouTube to figure out. The packaging is very well done, but the Z axis clamp between the motor and rod had a missing bolt, I found it in the packaging after reading online that it was a common issue, make sure you keep everything until its fully assembled. The printer feels solid and well put together, there has been some compromises to reach the price point like exposed electronics, but this is acceptable for what you get. The guide also skips bed leveling and this might be the most important step to get this working, highly advisable to watch a You Tube clip on it. Please see the image of benchmarks I printed, not bad at all for having used this machine for just a few hours.

    Comments (3)
  • 01/12/2020

    Nothing else left to say about this printer now. Near perfection right out of the box. I ordered the Ender 3xs Pro with upgrade. The mainboard should be a v1.1.5, but I got a v4.2.2 32bit mainboard with the TCM2208 drivers. Everything has printed first time and so far I haven't had even 1 failed print. The pics show my 3rd print, an LED light ring with 0.3 layers. There is a problem with some of the V slot wheels, worst 2 are pictured. The X axis has 1 flatspot, the Y axis has 2 flatspots and the bed does flick a little at the flatspots. Four replacement wheels will do the job. Apart from that, I am so happy with this printer.

    Comments (4)
  • 12/09/2020

    Fast delivery from CZ to Greece 10 days with EU Priority mail (DHL) Printer very well packed. Appox 1 hour to assemble, alot of youtube videos to help put together. Has the V1.1.5 board installed, very quiet! Only the fans make noise. Works well! Only wish I waited a month more to get it with the new 32bit board preinstalled :(

    Comments (1)
  • 18/02/2021

    Amazing! Assembly took around 30 minutes. Pretty straight forward to follow instructions. Print quality is excellent using default settings (all pics except the vase were just default 'standard' quality prints. The vase was a spiral contour print. Firmware is pretty out of date so will be upgrading that but it's otherwise amazing value for money. Would recommend to anyone. It also comes with a small amount of white filament which I am guessing is PLA.

    Comments
  • 03/11/2020

    The printer is very good and the price is outstanding for printing quality. The printer is very quiet thanks to the better mainboard. The print quality is outstanding even small prints look very good. The instruction that comes with is not so good because many steps are not well explained, however YouTube videos help here, it is not explained for example how to press the reels. Can recommend to buy. Greetings from Germany.

    Comments
  • 19/03/2021

    Very impressive that the delivery took only a few days. Very simple to install when there is plenty of vacuum on YouTube to how to put it together. Quiet enough to be able to study in the same room and finally the final results are of incredible quality. I really recommend investing in a Creality machine

    Comments
  • 16/10/2020

    What a machine... 11 out of 10 for this product. for a first time user this is the best user friendly printer. wish I bought this years ago. bed leveling was really easy. first print was a quick learning curve,but a few quick tweaks and bam. printing like a dream. thanks banggood best service ever......

    Comments
  • 07/09/2020

    I have been using the printer for about ten days, I am very satisfied with the purchase, arrived on schedule, about 7 days from Spain.The packaging for the truth a bit bruised but the pieces to assemble of the product were all ok. The Printer is a bomb, apart from the necessary adjustments and calibrations as well as having to take a little hand goes which is a marvel, I keep it still very little.

    Comments
  • 11/07/2020

    Wow, this printer is a fantastic upgrade from my old Tevo Tarantula, easy to assemble, watched Vlads video on YouTube on how to assemble - https://youtu.be/ibsOYzXduYc Easy to level and the prints are excellent. The motors are really quiet and I might bring this one in from the garage to my work room.

    Comments
  • RomVIP5
    FR
    06/07/2020

    Great printer. I'm a novice in 3d printing but from the first impression, the result was amazing! Thanks to the motherboard, moving the print head makes no noise, however, the fans blow pretty hard (don't imagine sleeping in the same room as the printer being printed). Attention, it is apparently the extruder which is an mk10 model, not the nozzle which is an mk8. This is confusing and I have read many messages where people have been fooled by not ordering the right spare nozzles.

    Comments
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • US$206.00
    • US$179.00
    • US$21.99
    • US$259.00
    • US$20.99
    • US$42.63
    • US$19.99
    • US$26.99
    • US$19.99
    • US$219.99
    • US$39.92
    • US$7.99
    • US$3.99
    • US$4.99
    • US$34.99
    • US$5.99
    • US$279.00
    • US$4.99