Customer Reviews

4.82 out of 5
Write a Review
  • All Reviews (49)
  • Image (3)
  • Video (0)
  • All Star
    • All Star(49)
    • 5 Star(46)
    • 4 Star(0)
    • 3 Star(1)
    • 2 Star(1)
    • 1 Star(1)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United States)
  • Cyril
    April-04 2016 11:03:26

    Ordered these few times already. Always in bulk by 10pcs. No problems at all.

  • December-23 2016 16:44:10

    Goods received. If the pressure is less than 0.5 kgf / см2 then open the bottom valve

  • March-14 2017 14:20:12

    Fulfills its mission by 146%:)

  • July-03 2016 19:56:43

    The trapped spring of my old regulator popped out (break) the plastic encasement and my airbrush compressor was de-commissioned. I didn't use the compressor that often because I couldn't adjust the pressure when the "pop up to adjust" knob broke and slipped on the knurled spindle. I thought this look familiar so I ordered it. I am pleased it is the same in the important areas like identical inlet and outlets using the 'BSI' or something thread (that was the main reason why I didn't fix it earlier, there seems to be many systems of thread, bewildering!). There are some differences, the new screw tap seems better designed and I think it will last much longer than my previous regulator. It came with a pressure gauge (I didn't need it) which is not in "psi" but it doesn't matter because I can re-use the old one. I thought I could but found I couldn't extract the old connector fittings from my old damaged regulator. They were probably glued in, so I purchase two new valves of the correct size (the connectors were out of stock in my local hardware shop) and screwed them in with teflon tape. I probably didn't do a good enough teflon job because it hisses air but I can conclude that the regulator works and is adjustable. Now I've ordered two reducing connector fittings from Banggood which also seems familiar simply because they are cheap from Banggood and I prefer them over the valves.

  • April-17 2017 14:53:00

    The gauge was off when it arrived - it doesn't go down to 0. I checked it with another one i had lying round and the movement of the needle corresponds well with the changes in pressure - as i use it for airbrushing i have it set on the standard pressure and marked it with a pen on the glass - and adjust from there - so the dial itself was never really the most important feature.

  • January-29 2018 06:11:13

    This is a direct fit to my 9L 8bar bench compressor. Two rols of teflon tape for the sealing and ready to blow ! Everything as expected at an unbeatable price.

  • October-24 2017 17:57:17

    Todo esta perfectamente como se indica y ademas tiene buena cálida, muy contento con este producto. Real mente merece la pena la relación precio calidad lo recomiendo. Ok

  • December-28 2015 12:04:55

    It is perfect and perfectly suited to my air compressor, besides having the refillable tank with light machine oil lubricated air it keeps forever. Advisable.

    Comments (1)
  • August-02 2015 04:05:22

    When I recived the regulator the glass to the pressure gauge was broken. Bangood gave me the mony back so that I could order a new one. The regulator works well!

    Comments (1)
  • July-07 2017 19:03:53

    Por el precio que vale no se puede pedir más, funciona correctamente. El algo duro el botón de regular, pero hace su función correctamente


    Total 0 pages

    Go to page

    recommendation for you
    • US$49.14
    • US$25.99
    • US$4.75
    • US$3.52
    • US$3.52
    • US$22.99
    • US$4.37
    • US$2.48
    • US$13.23
    • US$364.20