Customer Reviews

4.86 out of 5
See all 1713 reviews
Write a Review
  • All Reviews (1713)
  • Image (360)
  • Video (3)
  • All Star
    • All Star(1713)
    • 5 Star(1580)
    • 4 Star(83)
    • 3 Star(17)
    • 2 Star(2)
    • 1 Star(31)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United States)
Show Original

A part of the review has been auto-translated.

  • 14/01/2021

    Great printer. My first printer. Shipped from Spain and arrived in Italy in 5 days (including a festive one). It arrives pre-assembled, and easy to assemble. Before choosing it I saw a lot of videos and reviews and I have to say that so far I made the right choice. It has the TMC2100 (they are not the last but quiet and they are fine) the fans in general are moderately quiet. The 220 plate heats up in a few seconds and when you cool the moulded piece immediately comes off (you have to do some practice with manual leveling and slicer parameters, at first it might seem difficult, you will throw a lot of thread if you are a beginner like me, but after various experiments and tips from social media you get there). My kids are having fun printing everything. The only thing that bothered me is that in the pictures she looks ready for car bed leveling, in reality the machine arrives without a firmware with this function (you have to update from unofficial firmware gives what I understand) and you have to add a support that the house does not provide (you have to print it you but do not say what to print) and when I challenged this thing to the customer service (I understand that not insert the piece for the ABL but at least give the support), After several emails in which they could not understand, they replied that the machine never had the ABL (I let it go is like talking to a wall). Unfortunately forget a customer service that is able to solve or make you through with the mother company, Banggood on this still has much to improve. In conclusion I recommend this product, only evaluate if you can do without Banggood customer service before buying.

    Comments (12)
    Show Original
  • 26/11/2020

    the best 3d printer i've ever had!! i've had dagoma, ender 3, cr10,.. I hesitated with her older sister for a long time, but the surface is perfect for me. The possibilities of adjustments from the screen are top, the wire changes are simplified, the tray adjustment is childish, the noise is very low. I print mostly in PLA: normal, carbon, wood, everything goes there. The quality is excellent. I use IdeaMaker in slicer for its much better possibilities than Cura. I also bought a better quality heatbreak as well as special nozzles and told me that at the first signs of wear, I will change... but it's... do not hesitate to order this marvel!

    Show Original
  • 10/03/2021

    I searched for a good printer (my first printer) at a low budget and it is quite impressive how good it works ... the packaging is very good, the printer itself is quite easy to install and use . I used tingiverse file and cura for slicer it have the correct preset for the printer (only printhead settings for sequential printing are incorrect)... I started with the test cube included in the USB pen, it sticked too hard to the hotbed and bad layer adhesion (the pla I got needed higher temperature I found It out later when I printed a temp tower) results braking it also ecause there is no spatula included !!! no test filament included so buy it if you whant to use your new printer 🤣 some minor imperfections in plastic parts but unnoticeable and doesn't influence the hardware... so as my absolute first 3d Printer and totally new in this world I can definitely suggest to buy this printer! I am really satisfied with it and enjoying the learning progress... btw first 2 weeks owning it has been a non stop testing and printing ✌🏼 I included a picture of the hotbed rails I printed because it could be usefull to prevent hot bed cable braking it is a good way to learn sequential printing when you need many parts in one print ;)

    Comments (2)
    Show Original
  • 14/03/2020

    Awsome! I love it! I am a totally noob in 3d printing, the Genius is my very first 3d printer and I do not have any experience in 3d printing. I bought it because it was said to be very silent, what is extremely important for me. And: This printer is silent, silent, silent - you wont believe! My aquarium makes more noise. You could even place it in your bedroom, every ventillator or air condition makes far more noise. It came packed extremely well and secure. Assembling is a thing of minutes, only 5 screws and 5 plugs... I recommend to watch the video of Just Vlad on Youtube - extremely well explained, extremely helpful. Received the printer yesterday eveneing, set it up, made my first two prints without problems (and settings). However, a Cura template for the Artillery Genius would be very helpful, actually there seems not template available. Highly recommended as very first printer - and highly recommended for people living in an appartment where printing noise could be a problem. Extremely satisfied with this purchase.

    Comments (1)
    Show Original
  • 24/03/2021

    Really good printer. Maximum perfection in details, easy to use and very intuitive. Among its advantages the glass plate that allows objects to be removed with ease. Very quiet. Gentile sellers and always available to answer all questions. The only problem I had to pay 37 euros of customs despite having chosen to receive it from Spain

    Comments (2)
    Show Original
  • 17/11/2020

    made the purchase from Colombia and was delayed in arriving a little more than two months as it happened to make a change of store, in that time the banggood service was excellent, they always responded, the printer arrived in perfect condition, very well packaged. The performance of the machine remains to be seen. 👍👍👍

    Comments (3)
    Show Original
  • 11/11/2020

    Very good printer, delivered in France in about 5 days from CZ. The product is well protected in its cardboard, it is the same cardboard that you can see in the unpacking on youtube. It works perfectly with instructions in French (EN, CN, DE, ES, IT and RU) and the accessories you see on the photo (key usb, assembly and adjustment tools, spare tablecloth and rollers, cable usb and a small circuit board to add auto leveling. A small reel of PLA to start printing would have been welcome.

    Show Original
  • 12/06/2020

    I purchased the Artillery GENIUS in May 2020 and it has exceeded my expectations. There are many competitor 3D Printers that are more expensive than this one but to be honest I am delighted with this product and would highly recommend this to others (I have no connection with, or sponsorship from, Banggood - but I do like to buy from them). The things I liked about the GENIUS were:- 1) Construction was extremely simple - four bolts plus making a number of connectors. 2) The build is robust and the quality is impressive. Having read earlier reviews, I was expecting problems with the ribbon cables popping out of their sockets (but this had already been addressed with a glue solution and was not an issue) and I was expecting problems with breakages in the filament feed lever (but this has apparently been addressed as there have been no issues - I did purchase a metal replacement in advance but this is now just a spare). 3) The 3D Printer was already calibrated / tuned and needed only a small amount of adjustment to get the bed levelled. 4) In operation, the printer is incredibly quiet and produces PLA prints of very high detail and resolution. The layer deposition is even and fully fused, leaving a very smooth surface layer.

    Show Original
  • 20/07/2021

    This is my first printer and I couldn't be happier with this machine. Came very well packaged and setting it up was quick and easy. I have almost zero knowledge about 3D printing apart from watching a couple of videos on how to set it up and I got great results right from the first print. I wanted something to print flexible materials and I've printed heaps of TPU parts from thingiverse using the default settings for this printer in CURA. I've also started using tinkercad to modify models and create things I need from scratch and I've been amazed at how easy it is to quickly make very useful items. It's very quiet without the need to do modifications.

    Comments (1)
    Show Original
  • 05/05/2021

    Il prodotto è arrivato ben imballato e sembra non presentare difetti. Il montaggio è abbastanza intuitivo, ma sul libretto non è spiegato eccellentemente poiché ci sono alcune piccole viti che non viene spiegato a cosa servono, come non viene spiegato come montare la bobina del filo. Ho dovuto cercare dei tutorial per esser sicura di aver eseguito correttamente tutti gli assemblaggi. Ancora non l'ho utilizzata perché sono in attesa del filo. Per me è la prima stampante in 3D quindi non sono in grado di paragonarla ad altre. Le tempistiche di consegna sono accettabili; nel mio caso ha impiegato 12 giorni in più perché durante il tragitto, per lavori ferroviari, il pacco è rimasto fermo e di questo sono stata immediatamente avvisata tramite e-mail. Se mi sarà possibile farò nuova recensione appena riuscirò ad utilizzarla.

    Show Original

    Total 0 pages

    Go to page


    You might be interested in

    recommendation for you
    • US$259.00
    • US$9.99
    • US$330.46
    • US$2.00
    • US$29.99
    • US$22.99
    • US$87.99
    • US$10.20
    • US$92.99
    • US$94.99
    • US$259.00
    • US$35.00
    • US$149.00
    • US$139.00
    • US$349.00
    • US$1.40
    • US$4.00
    • US$2.71