Banggood

It looks OK, brand new, I'm going to test it Thank you BG

Looks great, but doesn't use original ws2811 ic's. I think it should say that in the description.

Buen producto, pero tendría que mejorar para que cada led sea personalizable independientemente, ya que en este caso solo se fijan los colores en grupos de 3 Leds Pixel. También podrían especificar el orden de los cables RGB, ya sea, GRB, GBR, BRG, etc.

good value for money. 1 chip per 3 leds.

τελεια,ηρθε στην ωρα του

There isnt much that can be wrong. It either works or it doesn't. Colors are bright and vivid. 36 Watts is used when all leds are turned White at 255 brightness (so red blue and green are all on) and that seems fair. It does give a bit of heat, but nothing to worry about. The adhesive seem to be a little bit dodgy, I do not think it will last long at all. I recommend using a tiny bit of superglue here and there to make it stick strongly to whatever surface u are using it on. Especially with the radient

I seem to have an obsession with leds. these were bought to make up a matrix display but decided not to use it, going for individual chips. the strip tests fine, no duds and again, runs incredibly bright on the max setting. If you run them at 25% you still get a great display but also you can then run the whole strip from a very small power supply.

Works well when driven by Arduino using the AdaFruit Neopixel library. Let's hope the quality is good enough have a functional LED-strip in the years to come.

No complaints. These 5050s look great were easy to set up have a good 3m backing and are easy to assign a color.. Seller has fast shipping and good packing LEDs came in an ESD zip bag

Ordered a couple for under the counter and custom lighting needs. Looks like these led strips will work great. Thanks for the product once again Banggood.