Customer Reviews

4.92 out of 5
See all 668 reviews
Write a Review
  • All Reviews (668)
  • Image (107)
  • Video (1)
  • All Star
    • All Star(668)
    • 5 Star(621)
    • 4 Star(43)
    • 3 Star(3)
    • 2 Star(0)
    • 1 Star(1)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United States)
|
Show Original

A part of the review has been auto-translated.

  • 23/11/2019

    I was worried this might be junk. It's not. It's very well designed and built. They have looked after the details. All the lead screws are lubricated, the packaging was done with care and both the package and the product are well designed and sturdy. There are four nuts and bolts to put on, but it's no great ordeal, even an extra nut and bolt included, in case you drop one -- you know you will. The X&Y axis controls are, of course, steppers used in CD drives etc. The print range is 80mm x 80mm as advertised. As they rightly say, it's a hobby engraver in speed, but 3000mW is a lot of laser power relative to those of a few years ago. Connecting the device: The worst part. It comes with drivers for Win and Mac. I couldn't get it to connect on a Mac Mini, c. 2006 with the latest macOS. Windows 10 Pro. Thinking my problem was mostly software, I went here and used the manual install script and drivers. https://www.theautomationstore.com/how-to-install-our-usb-driver-except-1747-uic/ It may have been the USB cable, but it did come online after lots of fussing. Be careful! This is not a toy -- it only looks like one. 445–465 nm – InGaN blue laser multimode diode, 400–780 nm Risks: photochemical damage to the retina, retinal burn CLASS 4 LASER PRODUCT. Class 4 is the highest and most dangerous class of laser, including all lasers that exceed the Class 3B AEL. By definition, a class 4 laser can burn the skin, or cause devastating and permanent eye damage as a result of direct, diffuse or indirect beam viewing. Indium gallium nitride (InGaN, InxGa1−xN) is a quantum heterostructure semiconductor material made of a mix of gallium nitride (GaN) and indium nitride (InN). It is a ternary group III/group V direct bandgap semiconductor. Its bandgap can be tuned by varying the amount of indium in the alloy. InxGa1−xN has a direct bandgap span from the infrared (0.69 eV) for InN to the ultraviolet (3.4 eV) of GaN. 400–780 nm (visible).

    Comments (1)
    Show Original
  • 29/12/2018

    Recebí o produto conforme o anuncio, estava em perfeito estado funcionado corretamente. Faz o que promete! Gostei do produto, pelo custo beneficio atende minha demanda. Resta saber se é durável!

    Comments
    Show Original
  • 12/08/2021

    This is so easy to setup and use, I had a piece of MDF to "play on". You can see smoke staining on some of the deeper carvings but that could have been stopped by using masking tape as a burn through layer. For a first time laser carver this is just a great beginners unit. It even handled a colour photo easily

    Comments
    Show Original
  • 03/04/2020

    Came in quickly, the delivery company sent the mail to Russia, and then the tracking stopped. I didn't find out about it until I found a leaf in the mailbox. Very pleased with the acquisition! Purchased for engraving leather products. Works fine! A kid can figure it out. Problems are real at dawns only. On the flash drive several files with different versions of software, for himself selected the earliest. Of cons - odor while working. It's to be expected - burns yet. But it's better not to use this thing in the apartment, or to ventilate the room well. The apparatus for his money! I recommend it.

    Comments (3)
    Show Original
  • 10/12/2019

    Impressive piece of hardware. To test the resolution, I created a 1024x1024 test image with black and white pattern. It took 36 minutes!!! to print on 51 x 51 mm, @power 100% and @depth 10%. It shows that details smaller less than 8 pixels will not be visible.( I might have reduced laser power.) So keep your image max 128 x 128 when enlarged to 51x51 mm.

    Comments
    Show Original
  • 29/09/2019

    love it! Works straight out of the box. Currently engraving everything I can get my hands on. currently engraving my wife's sewing box with it. the great thing about this laser is that you can place it on anything of any size and engrave it. For the price you pay it is well worth buying!

    Comments (1)
    Show Original
  • 28/11/2019

    Working very well, can engrave even on metal parts when set the slowest speed.

    Comments (1)
    Show Original
  • 11/09/2020

    Excellent product, easy to handle and configure. It is the first time I buy and I was surprised by the shipment only 15 days to have it at home. 100% recommend the product and Banggood

    Comments (1)
    Show Original
  • 15/11/2019

    After reading all the reviews, I was prepared for some disappointment, but was quite surpriseed how nice the machine is. What really shocked me was how well the software worked, right from the start and integrated completely with the laser unit. I've attached three pictures below. One is of my astronomy club logo, the second one shows the engraving almost completed by the presence of the red cast to the displayed logo, and the final pic is of the finished product on the sample piece of wood veneer included with the laser. This was my FIRST attempt and I was stunned how well it turned out!

    Comments
    Show Original
  • 20/02/2020

    It works very well, I am very happy to have bought.

    Comments
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • US$299.99
    • US$439.99
    • US$449.00
    • US$499.99
    • US$499.99
    • US$629.00
    • US$209.99
    • US$259.99
    • US$329.99
    • US$289.99
    • US$199.00
    • US$849.99
    • US$1,299.99
    • US$199.00
    • US$349.99
    • US$569.99
    • US$479.99
    • US$12.86