A part of the review has been auto-translated.
As can being seen from the photo....the results speak for themselves. Good price and a speedy delivery. Will buy again.
These aluminium alloy rods, have a flux core, and will brass aluminium, copper, and steel (dissimilar metals) to self or each other. They are mostly useful for crack repairs in aluminium castings, to prevent the crack progressing (drill a tiny hole first just beyond end of crack),*and to stop gas or fluid leakage. Offer price was a no- brainer purchase. Already I used a rod to seal a crack from weeping oil. Must have surfaces scrupulously cleaned using denatured alcohol, brand cleaner, cellulose thinners or similar. Clean crack and surrounding area thoroughly. Be careful because rods melt at very close to the base alloy of casting in some cases. Don't be too fierce with gas torch. Butane is enough heat, but you can use propane mix,for MAPP gas. Acetylene is NOT required. Remember you are BRAZING, and not Welding !
good 🤠☺️
they work well, try a stainless steel pot lid. the brazing is good and does not rust. the melting temperature is medium-high
doesn't work like they tell you
The product arrived early, and we just need to try it.
Great wire for attacking holes.
Super!
The rods came excellent, inside the rod additive, diameter 2mm. качествоотличное
items as described