100-240V 40A Digital PID Temperature Controller SSR K Thermocouple Sensor
A part of the review has been auto-translated.
not schema included. I upload it for help people
Got this to control a fan for a BBQ smoker and it works right out of the box without going into settings. I probably wouldn't buy this if you need to tweak what I would call the deep settings. Just hook up the thermocouple, hit set and input your target value (SV). I'm only going to use this for heating so I don't need to adjust anything else. I may do something with the alarm relay but I'll be right next to it as it works so its not like I need an audible alarm. The SSR supplied will only work with AC loads. I'm using a DC fan so I got the SSR-100 DD Solid State Module Solid-state Relay DC-DC from here.
Хороший полноразмерный (100 мм) терморегулятор в комплекте с твердотельным реле и термопарой в оригинальной заводской упаковке с инструкцией на английском. Единственное несоответствие, это термопара в комплекте на 400 градусов, а терморегулятор по умолчанию запрограммирован на термопару 999 градусов.
fast shipping good packaging
Good appearance, good price of the kit. But in this version of REX C-100 controller, it can only be used with thermocouple K up to 999 C °, and only in heating mode, also configure the parameters of the PID or use it in ON / Off with configurable band. It has a unique alarm configurable also that can be useful as a second relay output. The manual is in English, but it is for the original version of the REX C-100 and few functions of this, can be used in this version. It is configured in C ° and can not be changed, it can not add decimals to measure and only use three digits of the four that have the display. And I could not enable PID autotuning. It is a simple version of the REX C100 with limited utility, but at the price of the Kit with the SSR and thermocouple is useful if you are looking for a basic controller.
fast shipping, they do good job.
Provided with an easy-to-follow English manual this tiny (40 x 40 mm front panel) controller has enough user modifiable parameters to steer my 2 x 230 VAC, 5 kW DIY foundry/ hardening oven, even though I had to add another +1300 C K-type element (as the provided thermocouple maxes out at 300C). The solid state relay can handle with a heat sink 40 amps, even though my oven will just pull some 13 A. The 25 metres of 1,2 mm Kanthal A-1 Wire (actually mfg'd some 75 mi from my place) was more expensive here than this entire regulator kit from abroad... Amazing!
Товар качественный, получил за 2 недели.
works as described.
Ürün sorunsuz ulaştı teşekkürler.